Skid Steer Stacking/Root Rake

Structural Features
constructed of T-1 wear plate
triangular bracing at stress points
double welded square structural tubing
no additional hardware needed
can be adapted for all backhoes and farm tractors

wide (6.5 feet)
52" overall height
9 teeth 28" long (small model: 5/8" thick - large model: ¾ or 1)
32" belly (carrying capacity)
23" cavity
approximately 900 lbs. weight

Skid Steer Hydraulic Rake

The Hydraulic Skid Steer Rake has the same general specifications as the Stacking/Root Rake. The hydraulic arms are two 2500 P.S.I. cylinders for heavy duty lifting, stacking, and loading. The separate arms work independently to adjust to various clamping situations.

Model Teeth Width Height Tines
RSS0548 7 5' 48" ¾ or 1
RSS6552 9 6.5' 52" ¾ or 1
RSS0852 9 8' 52" ¾ or 1

The following information is needed when ordering:
Make, Model, Serial Number
Quick Disconnect (if equipped) brand, make, and model

Click here for ordering & hook-up information

Note: Some Manufacturers will not share dimensional information of their products to an after market manufacturer in fear of direct competition. Therefore it may be necessary to obtain the information from the machine itself. The needed hookup configuration measurements can be obtained from the existing bucket configuration.

main page timber tamer thumbs rakes grapples buckets forestry dirt devil custom-misc contact us